The design of the playground equipment should be selected
Now there is a lot of playground equipment, amusement equipment design in constant innovation, then the playground equipment in the design of the time to pay attention to what matters?
First, the selection of materials
Construction of recreational facilities should make durable, hygienic and easy-to-maintain materials, potentially toxic substances and untreated metals (rusted or used as wires) can not be used for recreational facilities. The metal must be painted, plated or treated with rust. Wood is a good metal substitute, but it must be the same kind of wood without cracks, in any case, through the treatment of crack and irregular rupture (not just the surface). If you choose synthetic materials, the material should be durable and resistant to crack. Polished surface, especially rough, is one of the basic steps to reduce the risk of injury.
Second, the design of handrails and railings
Handrails and railings are the most common safety devices in amusement facilities. Handrails and railings can not only prevent the fall, while walking they can also play a support and stability role. Therefore, it should be based on the relevant provisions of its design is easy to grasp the size. The height and diameter of side protection facilities are determined by their location, whether on ladders, slopes, sidewalks or raised platforms, in accordance with the relevant requirements of the relevant local facilities.
Third, the role of the border
Whether to set the border depends on the age of the recreational facilities and the children climbable heights. With a guardrail, the border can prevent the children from falling from the raised platform and avoid climbing too high. Therefore, the border should be designed to prevent climbing, standing or sitting on top. Therefore, the boundary should enclose the raised plane, leaving only an opening in and out of the platform. The opening should be smaller than the child's body, so that the child slips or stuck in the cracks. The height of the boundary from the platform, ladder or slope should be at least 70 cm.
Fourth, support the design
Many amusement facilities have a function of support for the hands and feet to provide support for grasping, maintaining balance and climbing. The size and position of handle should be suitable for the child to grasp, the handle firmly fixed on the main structure, to prevent them from falling off and rotating.
Five, seams, screws, edge of the installation
Such facilities include the external edge of the recreational facilities and the parts of the equipment. For safety reasons, you should avoid using sharp edges, sharp shapes and dangerous horns. To ensure that the surface of the welding parts is smooth, anchoring or supporting the structure of the structure of the components should be strong and stable. Nails should be flush in the main structure, the screws should be covered with plastic caps, and the protruding parts can not exceed 8 mm.
First, the selection of materials
Construction of recreational facilities should make durable, hygienic and easy-to-maintain materials, potentially toxic substances and untreated metals (rusted or used as wires) can not be used for recreational facilities. The metal must be painted, plated or treated with rust. Wood is a good metal substitute, but it must be the same kind of wood without cracks, in any case, through the treatment of crack and irregular rupture (not just the surface). If you choose synthetic materials, the material should be durable and resistant to crack. Polished surface, especially rough, is one of the basic steps to reduce the risk of injury.
Second, the design of handrails and railings
Handrails and railings are the most common safety devices in amusement facilities. Handrails and railings can not only prevent the fall, while walking they can also play a support and stability role. Therefore, it should be based on the relevant provisions of its design is easy to grasp the size. The height and diameter of side protection facilities are determined by their location, whether on ladders, slopes, sidewalks or raised platforms, in accordance with the relevant requirements of the relevant local facilities.
Third, the role of the border
Whether to set the border depends on the age of the recreational facilities and the children climbable heights. With a guardrail, the border can prevent the children from falling from the raised platform and avoid climbing too high. Therefore, the border should be designed to prevent climbing, standing or sitting on top. Therefore, the boundary should enclose the raised plane, leaving only an opening in and out of the platform. The opening should be smaller than the child's body, so that the child slips or stuck in the cracks. The height of the boundary from the platform, ladder or slope should be at least 70 cm.
Fourth, support the design
Many amusement facilities have a function of support for the hands and feet to provide support for grasping, maintaining balance and climbing. The size and position of handle should be suitable for the child to grasp, the handle firmly fixed on the main structure, to prevent them from falling off and rotating.
Five, seams, screws, edge of the installation
Such facilities include the external edge of the recreational facilities and the parts of the equipment. For safety reasons, you should avoid using sharp edges, sharp shapes and dangerous horns. To ensure that the surface of the welding parts is smooth, anchoring or supporting the structure of the structure of the components should be strong and stable. Nails should be flush in the main structure, the screws should be covered with plastic caps, and the protruding parts can not exceed 8 mm.
评论
发表评论